Retrofitting an existing garage-door opener or gate actuator with smart-home control used to require a full control-board swap. The RF Mando 2-channel Zigbee Tuya module solves that with a 5-minute install: wire it in parallel with your existing push-button, pair it with a Tuya hub, and your door becomes Alexa-controllable in under an hour.
Why Installers Are Stocking This
- Universal output: dry-contact relays + 220 V pass-through, both selectable by jumper
- Tuya / Smart Life app: zero monthly fees, works with Google Assistant and Amazon Alexa
- OTA updates: firmware improvements ship without on-site visit
- 2 independent channels: control two doors or a door + outdoor light from one box
Pair With the RF Mando Receiver Family
For retrofit jobs that still need RF remote control, pair this Zigbee module with an RF Mando garage-door remote receiver. The two sit side-by-side in the operator housing — app users and physical-remote users share the same motor without conflict.
Technical Snapshot
| Wireless Protocol | Zigbee 3.0 / Tuya |
|---|---|
| Channels | 2 independent |
| Operating Voltage | DC 12 V / 24 V ; AC 100–240 V |
| Max Load | 10 A per channel |
| App | Tuya Smart / Smart Life |
| Voice | Alexa, Google Assistant |
Typical Install (10 minutes)
- Mount module inside operator housing with double-sided tape.
- Wire 12 V or 24 V operator supply to module input.
- Connect motor control wires to COM1 / NO1 in parallel with the existing push-button.
- Power up — hold pairing button 5 s until LED blinks.
- Add device in Tuya / Smart Life app; assign room and name.
Distributor pricing is available for integrators handling 50+ installs/month. See the full module family on our product page.
{CTA_BLOCK}